Cary Audio SI-300.2d Integrated Amplifier

Digital Outputs	Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16 bit to 24 bit
Digital Input Sample Rates	USB operating at Sample Frequency (Fs) from 44.1 kHz to 384 kHz, 16 bit to 32 bit, DSD 64, DSD 128 and DSD 256 BLUETOOTH operating at Sample Frequency (Fs) 44.1 kHz, 16 bit AES/EBU, Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16bit to 24 bit
Master Clock Jitter	Below measurable levels
Digital Sampling Rates (Fs)	44.1 kHz to 768 kHz
Digital Filter	8x Oversampling Digital Filter
Digital/Analog Converters	2 channel AK4490EQ
BLUETOOTH	CSR Bluetooth v 4.0 with aptX® low latency audio decoder
Analog Filter	3rd Order Bessel
Preamplifier Outputs	Single – Ended RCA
Analog Input	Single-Ended RCA x 2 Balanced XLR x 2
Analog Input Impedance	10 kΩ Unbalanced 20 kΩ Balanced
Power Amplifier Outputs	2 x 300W RMS in 8 Ω from 20Hz to 20KHz 2 x 450W RMS in 4 Ω from 20Hz to 20KHz
Circuit Type	Solid State, Class A/B
Frequency Response	10Hz – 50KHz +/- 0.1dB (at 10db below rated output power)
Distortion (SMPTE-1M)	< 0.5%
S/N Ratio	>100dB, “A” Weighted
Protections	Full short circuit, thermal, Ultrasonic, RF Signal muting & current limiter
Control	Trigger output 12.0 VDC x 1 IR control x 1
Communication	Ethernet RJ45 full remote configuration interface Wi-Fi 802.11 b/g/n
Power Input	Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz
Power Consumption	950 Watts (4 ohm load at full output)
Finish	Black powder coated matte chassis with silver or black aluminum faceplate
Weight	52 lbs
Dimensions	6.0″ H x 17.25″ W x 18.0″ D